Ross NWE-TS, Руководство пользователя, Страница: 38 / 68

3–8 • Configuration NWE-TS User Manual (Iss. 01)
To enable Bypass mode
1.
Select the NWE-TS node in the Tree View of the NWE-TS you want to configure.
2.
From the Device View , select the Configuration tab.
3.
From the System Mode area click
Bypass
. The button is now lit, and the Bypass field
in the Status tab indicates that the NWE-TS is operating in Bypass mode.
To disable Bypass mode
1.
Select the NWE-TS node in the Tree View of the NWE-TS you want to configure.
2.
From the Device View , select the Configuration tab.
3.
From the System Mode area click
Active
. The button is now lit, and the Bypass field in
the Status tab indicates that the NWE-TS is operating in Active mode.
For More Information on...
• the location of the Bypass button on the front panel, refer to the section “ Front Panel
Overview ” on page 2-4.
Important
— The Transport Stream propagation delay through the NWE-TS is
approximately 430msec in Active mode, and 5
µ
sec in Bypass mode. Switching between these
modes will cause a transient disruption of the video and audio programming, and should only
be done when absolutely necessary.