Ross NK-IPS, Руководство пользователя, Страница: 9 / 42

NK-IPS Installation Guide (v5.0) Introduction • 9
Introduction
This guide is for system administrators and installers of the Ross Video NK-IPS Network Bridge. It provides
instructions on how to physically install and configure your NK-IPS.
This guide includes the following chapters:
• “ Introduction ” summarizes the guide and provides important terms, and conventions.
• “ Getting Started ” provides an overview for using the NK-IPS in a routing system.
• “ Hardware Overview ” provides a basic introduction to the NK-IPS front and rear panels.
• “ Physical Installation ” provides instructions for the basic physical installation of the NK-IPS.
• “ Configuration ” provides instructions on how to connect the NK-IPS to a network, connecting a video reference
signal, cabling for a Multiviewer Head, and connecting to source and destination devices.
• “ Operation ” provides additional information on the input and output designations for each NK-IPS.
• “ Using an NK-VCP ” provides information on using the NK Virtual Control Panel (NK-VCP) with the NK-IPS.
• “ DashBoard Interface Overview ” provides an overview of the DashBoard menus and parameters available for
the NK-IPS.
If you have questions pertaining to installation of this Ross Video product, please contact us at the numbers listed in
the section “
Contacting Technical Support ” on page 10. Our technical staff is always available for consultation,
training, or service.
Related Publications
It is recommended to consult the following Ross documentation before installing your NK-IPS:
• DashBoard User Guide , Ross Part Number: 8351DR-004
Documentation Conventions
Special text formats are used in this guide to identify parts of the user interface, text that a user must enter, or a
sequence of menus and sub-menus that must be followed to reach a particular command.
Interface Elements
Bold text is used to identify a user interface element such as a dialog box, menu item, or button. For example:
In the Save Layout dialog, click OK .
User Entered Text
Courier text is used to identify text that a user must enter. For example:
In the Language box, enter
English
.
Referenced Guides
Italic text is used to identify the titles of referenced guides, manuals, or documents. For example:
For more information, refer to the DashBoard User Guide .
Menu Sequences
Menu arrows are used in procedures to identify a sequence of menu items that you must follow. For example, if a
step reads “
File > Save ,” you would click the File menu and then click Save .