Ross NK-IPS, Руководство пользователя, Страница: 39 / 42

NK-IPS User Guide (v5.0) DashBoard Interface Overview • 39
Update IPS Network Settings Dialog
Click the
Network Settings
button on the NK Series IPS interface to display the Update IPS Network Settings
dialog. Table 8.2 summarizes the fields displayed in the Update IPS Network Settings dialog.
Throttle Switch
Requests Selected This is the primary NK-IPS when communicating with an
openGear MC1-MK.
Cleared This device is not the primary NK-IPS for an MC1-MK, or an
MC1-MK is not communicating with this device.
Remote IPS IP
Address #.#.#.# For a primary NK-IPS, this field is set to 0.0.0.0. On a secondary
NK-IPS, enter the IP address of the primary NK-IPS.
Remote IPS Port # For a primary NK-IPS, this field can be left to the default port of
5000. On a secondary NK-IPS, enter the TCP Client port of the
primary NK-IPS.
Connections
Max. DashBoard
Connections # Specifies a limit to the number of DashBoard clients that the
NK-IPS will allow at any given time (up to a maximum of 5).
The default value is 3.
Number of
connected Clients # Specifies how many clients are connected to the NK-IPS. The
maximum total is 20.
Log off Client # Selected The NK-IPS disconnects from the client device
Cleared The NK-IPS communicates with the client device
Reset
Reset IPS Selected Reboots the NK-IPS without clearing the NK-IPS settings. Any
changes to the NK Series IPS interface are sent to the device.
Cleared Does not reboot the NK-IPS
Other Functions
Refresh Reverts to the configuration previously sent to the device. The
NK Series IPS interface will display the last settings that were
sent to the NK-IPS via the Send Configuration function.
Send Firmware Opens a file browser to select a software/firmware file to send to
the device
Send
Configuration Uploads the settings to the device. All configuration items
become active only after uploading.
Reboot Reboots the NK-IPS. This function does not clear the NK-IPS
settings.
The
RESET
button on the front panel will perform the same
function.
Close Closes the NK Series IPS interface in DashBoard
Table 8.1 NK Series IPS Interface
Item Parameters Description