Ross NK-IPS, Руководство пользователя, Страница: 38 / 42

38 • DashBoard Interface Overview NK-IPS User Guide (v5.0)
Table 8.1 NK Series IPS Interface
Item Parameters Description
Network Settings Opens the Update IPS Network Settings dialog to configure the
network settings for the NK-IPS
Device Details
Serial Num # Indicates the unique serial number assigned to the NK-IPS
(read-only)
Hardware Rev # Indicates the hardware version of the device
Name <text> Assigns a unique identifier to the device. This field has a
maximum of 16 characters.
Group # Indicates the Group number the device is assigned to. This field
has a maximum of 10 characters. By default it is blank.
MAC Address # Displays the Media Access Control address which is a unique
hardware address for a device on a network (read-only)
Firmware # Indicates the firmware version used by the NK-IPS
Details <text> Additional details provided by the user to be used for description
and identification only. This field has a maximum of 16
characters.
Address # This T-Bus address is used within the overall control system to
identify devices. Each device must be given a unique T-Bus
address to avoid hardware and communication conflicts. The
valid range for assigning an individual device T-Bus address is
1-255.
Network Settings
IP Address #.#.#.# Assigns a unique IP Address to the NK-IPS
Netmask #.#.#.# Assigns the netmask value to the NK-IPS
Gateway #.#.#.# Assigns the IP Gateway value to the NK-IPS
DHCP Selected Automates the assignment of the Ethernet settings for the
NK-IPS
Cleared User must manually specify the Ethernet settings for the NK-IPS
SLP Selected Enables usage of Automatic Device Discovery in DashBoard.
This is enabled by default.
Cleared Disables Automatic Device Discovery
Client Settings
Use Client
Control Password Selected A password is required when applications external to the
NK-IPS issue switch requests
Cleared A password is not required for switch requests
Client Control
Password <text> Assigns a password for the use of client devices. This field is
case sensitive with a maximum value of 20 characters. The Use
Client Control Password box must be selected.
Client TCP Port # Defines which port is used for network communication. The
default value is 5000.
MC-1 Interface