Ross NK-3G144 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 64

Ross NK-3G144 Скачать руководство пользователя страница 52

52 • Operating a Routing Switcher

NK-3G144 User Guide (v04)

Frame Details Area

The

Frame Details

area displays the device type numbers loaded from the frame EEPROM. The following details

are displayed:

Alarms Area

The

Alarms

area displays the following:

Table 6.7 Status Descriptions

Item

Description

Reference Signal Type
(read-only)

Local: the routing switcher is generating a free-running switching
pulse every 40 ms.
Reference Present (Tri-Level HD sync/PAL/NTSC): the routing
switcher has detected an external video reference signal.

Chassis Fan Speed
(read-only)

Displays the speed of the chassis fans in RPMs.
The table represents the fans as they are viewed with the door of
the routing switcher open.

Chassis Fan Errors
(read-only)

The number shown for each fan is the total of the following
conditions:
0: no errors
1: startup speed warning
2: startup speed failure
4: running speed warning
8: running speed failure
16: stopped (failure)
The table represents the fans as they are viewed with the door of
the routing switcher open.

Matrix Fan Speed
(read-only)

Displays the speed of the matrix card fans in RPMs.

Fan Target (read-only)

Displays the target speed to which the front fans are currently set
(

Slow

,

Med

(medium),

Fast

, or

Full

).

V Pulse Internal Error
(read-only)

If the check box is showing as selected, this indicates that there is
an error with the generation of the switching pulse.
If this check box is showing as selected and crosspoint switches
are not occurring, please contact Ross Video Technical Support.

Table 6.8 Frame Details

Item

Description

Family Number (read-only)

Combined

Family

and

Device

numbers:

• 9807-5144 = NK-3G144
• 2500-200 = NK-3G144
• 2500-201 = NK-3G144/NK-3G144-X, Carbonite eXtreme

Device Number (read-only)

Frame Hardware Revision
(read-only)

The build revision of the frame hardware.

Fan HB Hardware Revision
(read-only)

The build revision of the front fan controller board.

«
...
50
51
52
53
54
...
»

Содержание NK-3G144

































































Отзывы:

Нет отзывов