Installation (Iss. 02) • 8
removed for adjustments. Carefully consider the installation location before
proceeding; the adhesive is very aggressive and is not easily removed. The
adhesive will cure fully in 24 hours.
To install the Surface Mount Strips
1.
Remove the
Protective Backing Film
from the adhesive on the
bottom of the two VELCRO® brand
Surface Mount Strips
.
2.
Adhere the
Surface Mount Strips
to the bottom side of the chassis.
(
Figure 2
Surface Mount Installation Option
3.
Remove the
Protective Backing Film
from the other side of the
VELCRO® brand
Surface Mount Strips
.
4.
Press the chassis into position on the surface you want to mount it to.
Operating Tip
— An additional VELCRO® brand
Surface Mount
Strip
is available to mount the power adapter.
Non-Slip Pads
Four non-slip adhesive pads have been supplied for desktop placements. Simply
remove the protective backing film from the adhesive and affix one non-slip pad
to each of the four corners on the bottom of the chassis.
Optional Mounting Accessories
Ross Video is committed to providing practical solutions for the needs of your
high-quality broadcast facility.
