background image

 

CONNECTION TO THE TV

  Disconnect the STB from the mains supply before connecting or disconnecting the   

 

  cable the from TV.

  FAILURE TO DO SO CAN DAMAGE THE TV.

 

EARTHING

  The LNB cable MUST BE EARTHED to the system earth for the satellite dish.

 

LOCATION

  Slots and openings in the cabinet are provided for ventilation to protect it from over

  heating. Do not block these openings or allow them to be blocked by placing the STB

  on a bed, sofa, or other similar surface, nor should it be placed over a radiator or other  

 

  source of heat.

 

BATTERY HANDLING

   

Batteries may contain toxic agents that are hazardous to the environment. Therefore,  

   

dispose of the batteries according to the prevailing statutory regulations. Waste  

 

   

electrical products should not be disposed of with household waste. Please recycle    

  where facilities exist.  Check with your local authority or retailer for recycling advice.

 

INTRODUCTION

  This manual will help you understand the basic functions of your new Receiver such  

 

  as installation, general operation and many of the other features this STB offers. Please  

 

  make sure that you retain this manual and pass it on if you sell or give away your STB in  

 

  the future. All functions can be operated by the remote control. You can easily install this  

 

  Receiver by following the INSTALLATION instructions on PAGE 6.

 

WARNING

  The use of software versions other than that supplied by dealers or distributors will void  

 

  the manufacturer’s warranty. It is advised that only official software provided to you by  

 

  your dealer or distributor should be used.

 

UNPACKING

  Unpack the unit and check to make sure that all of the following items are included in  

 

  the box:

2

Digital Receiver

User’s Manual

User’s Manual

Digital Satellite Receiver

Remote Control

AV Lead

        2.0 General Introduction

1

2

3

4

5

6

7

8

9

0

OK

CH    

CH    

VOL

VOL

Содержание DVB-S 5010

























Отзывы: