7.3.2 Channel Lock
Press the
s
/
t
keys and select
“Lock Control”
. Press the key, you will then be prompted
to enter your password (the default is 00000). Using the
t
key, scroll down to
“Channel
Lock”
and then using the set to
“On”
. Press
“Menu”
and then select
“OK”
and press
to save your choice. You can now
“Lock”
any programmes you wish. Refer to section
5.1.5
for instructions on how to do this.
7.3.3 Changing Your Password
It makes sense to change your password from the Factory Default “00000” to something
of your choice. However MAKE SURE you WRITE DOWN the new Password and keep it
safe.
Proceed as follows;
Press the
s
/
t
keys and select
“Lock Control”
. Press the key, you will then be prompted to
enter your password (the default is 00000). Using the
t
key, scroll down to
“New Password”
and enter your new password using the numeric keys. You will then be asked to confirm your
new password by entering it again in
“Confirm”
. After entering you will asked
“Do you want
to save?”
select
“OK”
and press to save your new password.
7.4 AV Setting
This enables you to set your Video System to match your TV. Options are;
a. TV Type
b. Screen Type
7.4.1 TV Type: The choices here are;
a. Auto
b. PAL c. NTSC
The Factory Default is
“Auto”
. It should not normally
be necessary to change this.
7.4.2 Screen Type options:
a. 4:3
b. 16:9
Select the format that you require then press
“MENU”
. You will then be asked
“Do you want
to save?”
select
“OK”
and press to save your selection.
7.5 Time and Timer
Whilst the time is set automatically from the received broadcasts there is an option to adjust
the offset from GMT if required. It is also possible to adjust the
“Sleep Timer”
from this menu,
the choices being – 0, 10, 30, 60, 90 and 120 minutes. In practice it is recommended to do this
directly using the
“Timer”
button on the Remote Control as this is more convenient.
7.6 Reset to Factory (USE WITH CAUTION)
This feature enables you to return the Receiver’s settings back to how they were when it left
the factory. Please be aware that it removes all the changes to settings that have been made
and any stored programmes etc. Press the
s
/
t
keys and select
“Reset to Factory”
. The
screen will display
“Reset to Factory”
and you will be requested to confirm or cancel (
“Can-
cel”
is highlighted). If you have pressed
“Reset to Factory”
by accident, press
“OK”
NOW
to cancel the operation. If you really wish to reset your receiver use the to select
“OK”
and
then press the
“OK”
button to confirm. You will now be asked to input your password. Once
you have entered your password the Receiver will be immediately reset.
16
t
t
t
/
t
t
