Ross DAC-8013A, Руководство пользователя, Страница: 21 / 32

DAC-8013A User Manual (Iss. 01) Upgrades
•
4-3
Confirming the Upgrade
When confirming a card upgrade, the version number of the software is reported by the LED flashing
the same number of times as the version.
When contacting Ross Video Technical Support, ensure you have the software numbers ready.
Reading Software Version Numbers
Use the following procedure to read software version numbers:
1. Ensure the card is properly installed in the frame.
2. Power up the card and wait until the Input Status LED is lit. Refer to Figure 6 for
the LED location.
Figure 6. DAC-8013A Input Status LED
3. Hold the BOOTLOAD button down for three seconds. The card begins to flash the
Input Status LED red in the following cycle:
•
The first set of flashes are longer and are equal to the major version
number, or
M .
•
The second set of flashes are shorter and are equal to the minor revision
number, or
R .
Note The LED repeats the cycle until the BOOTLOAD button is
released.
4. Confirm that the displayed numbers match the upgrade version you have performed.
If the numbers do not match, contact Ross Video Technical Support.
This completes the procedure to read software version numbers.