Bank A-8: Video Gain
Use the following steps to adjust the ADC-8032A’s output video gain:
1. Select Bank A, and rotate
Function Select
to position 8.
2. Adjust video gain up or down as required:
•
Toggle
Mode Select
up
to increase video gain.
•
Hold
Mode Select
up
to increase video gain continuously.
•
Toggle
Mode Select
down
to decrease video gain.
•
Hold
Mode Select
down to decrease video gain continuously.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label Default
A 8
+
Increase
- Decrease
VID GAIN
(###.#)%
100%
Note
Video Gain
is one of the six “Proc Amp” controls that can be
reset using
Factory Defaults
(Bank A, Position E).
Bank A-9: Black Level Offset
Use the following steps to change the card’s output black level. This setting is a black level offset that
is
not
affected by the
NTSC Setup
function (Bank B, Position 1). For example, with
Black Level
Offset
at 1 IRE and
NTSC Setup
off, the black level will be 1 IRE. With
NTSC Setup
on and a setup
level of 7.5 IRE, the black level will be 8.5 IRE.
1. Select Bank A, and rotate
Function Select
to position 9.
2. Choose the desired Black Level Offset setting:
•
Toggle
Mode Select
up
to increase the black level offset.
•
Hold
Mode Select
up
to increase the black level offset continuously.
•
Toggle
Mode Select
down
to decrease the black level offset.
•
Hold
Mode Select
down to decrease the black level offset continuously.
Bank SW1 Function Select SW2 Mode Select Heads-Up Display Label Default
A 9
+
Increase
- Decrease
BLK OFF
(##.#) IRE
0 IRE
Note
Black Level Offset
is one of the six “Proc Amp” controls that
can be reset using
Factory Defaults
(Bank A, Position E).
ADC-8032A User Manual (Iss. 04)
Using Banks
•
4-7