35
English
Maximum size of gas cylinder
When placed in the cylinder holder:
max. 570 mm
max. 320 mm
Fitting the hose and gas pressure regulator
The gas pressure regulator must comply with the
current version of standards EN 12864 or EN 16129, as
well as national regulations.
A)
Attaching the hose connector – for Germany, Aust-
ria and Switzerland
The individual components of the multiple connector
are attached by a ¼" BSP external thread. The hose
and pressure regulator are connected to the gas rail
connection with the aid of a spanner.
Ensure that the connectors are firmly mounted
and gas-tight.
B)
Fitting the hose – for BE, DK, ES, FI, NL, NO, SE, FR,
GB, IE, IT, LU
• The appliance is supplied with a universal adaptor for connecting the gas hose including the gas pressu-
re regulator (not included in scope of delivery) to the gas rail.
Connect the universal adapter to the ¼" BSP external thread.
Tighten with the aid of a spanner.
Use suitable hose clips or crimp clamps to fix the hose to the adap-
tor and tighten the clips/clamps securely. Once you have fitted and checked the hose/pressure regulator
connection to the gas grill, turn on the gas cylinder and check the connections for leaks. Make sure that you
keep well away from any possible sources of ignition during this process.
• Keep the gas hose and the electrical power cord away from hot parts.
• Avoid twisting the gas hose unnecessarily.
• Always check the gas hose for cracks, pinches, wear and other damage before using the grill. If the gas
hose shows signs of damage or wear, it must be replaced immediately.
• Replace the gas hose if damaged or when required by national statutory regulations.