ROSIERES RFC3O5879PNI, Инструкция пользователя

Страница: 14 / 34

EN 14
REMOVAL AND CLEANING OF THE GLASS DOOR
1. Open the door 90° and pull the hinge fixing tabs toward the outside of the oven.
2. Put the door at a 45° angle, then pull the door forwards and upwards at the same time to release it.
Remove the oven door and place it on a cushioned surface (e.g. on top of a piece of fabric) with the handle
facing down.
3. Unscrew the two screws on the left and right and pull the upper door cover towards you to remove it.
4. Carefully remove the glass inside the oven, holding it firmly with two hands and placing it on a soft, flat
surface.
5. If there are glass panels in between, remove them and place them on a soft surface.
ATTENTION: the outer panel of glass is not removable
6. Clean the glass with a soft cloth using an appropriate cleaning product.
7. After cleaning, reassemble the parts in the opposite order to removal. On all glass panels, the “Low-E”
indication must be correctly legible and positioned on the left side of the door, near the left side hinge. This
ensures that the printed label on the first glass panel remains inside the door.
8. To attach, push the top cover forward and tighten the two screws on the left and right.
9. Holding the door at 45°, simultaneously insert the right and left male parts of the hinge into the holes of
the hinges released, until you hear them click in place. Bring the door to an angle of 90° and lock the fixing
tabs in place by pushing them towards the inside of the oven.
1
4
7
2
5
8
3
6
9