Dual 2.5" to 3.5" SATA JBOD Coverter
Dual 2.5" to 3.5" SATA JBOD Coverter
User Manual
User Manual
RX310
RX310
2
3
Preface
Features
Mode Description
Product
Before using this product, please back up your original hard disk data.
Once the JBOD is established, the original hard disk data will be lost.
After the establishment of the JBOD, please re-initialize, partition and format disk
for further use . This product only supports “JBOD” mode. For first time use or
changing the hard drive, press "Confirm button" to reassemble JBOD.
Confirm button: After changing HDD, press the “Confirm button” for 5 seconds.
1. Supports 2.5" SATA I/II/III HDD and SSD.
2. Converts 2 x 2.5" SATA HDD or SSD to a 3.5" SATA HDD for 3.5"
SATA Drive Bay and Backplane use.
3. Built-in RAID featuring: JBOD.
4. Compatible with most 3.5" HDD backplanes and hot swap devices.
5. Automatic HDD ejection design.
6. Screw-free design for quick and easy installation.
7. Aluminum construction for durability and drive protection.
8. Ventilation holes for excellent heat dissipation.
9. Dual LED indicators (HDD access LED for each HDD).
• JBOD Mode: Shown one HDD only, but the overall capacity equals the total
capacities of both HDDs.
** Install the product in the chassis, and place well hard drive under powered
conditions:
Press “Confirm button” for 5 seconds and then JBOD mode can be set
completely. After JBOD mode is set, go to the Disc Management to initialize
the corresponding disk, partition, format, etc.
Front Panel
Rear Panel
15 Pin power connector
7 Pin SATA connector
HDD access indicator
Confirm button
Door lock switch
