200Mbps Powerline Fast Ethernet Adapter KIT
-
RPLC-200KIT
- User
’s Manual
-19-
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to
authenticate/access) values are connected to the same powerline. Users want
to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security button:
1.
Press the
Security
button on Device A for less than 3 seconds.
2.
Press the
Security
button on Device B for less than 3 seconds. The button
on B must be pressed within 2 minutes
3.
Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval until
the operation succeeds or fails. The Power indicator will illuminate steadily on
successful completion. If an error occurs, the Power indicator on both devices
will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario:
Devices A and B are located in different networks. Users want to use them to
form a logical network.
In this case, using the Security pushbutton cannot pair Devices A and B. Users
can only use the Utility to form a logical network.
Please follow below to form a logical network using the Utility:
