6
UNPACKING AND ASSEMBLY
Before First Use
1. Remove packaging materials such as cardboard, plastics or Styrofoam and discard
appropriately.
2. Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
3. Clean the cooking pot in the dishwasher or with warm soapy water. Rinse, towel or air-dry
and place in the pressure cooker.
Lid Assembly
1. How to open the lid:
Hold the handle firmly while pushing down on the red lid release button, turn the lid counter-
clockwise until it loosens and lift vertically; the lid can stand on the Lid Rest Tab.
Note:
For new units, the seal of the Lid may be slightly stronger than normal and may be
slightly difficult to unlock. Once the Lid has been opened and closed several times, it will
loosen up.
2. How to close the lid:
Observe the Silicone Gasket ring inside the Lid and ensure that it is fitted into the lid all the way
around.
Caution:
• If the rubber seal ring is damaged, do not use the pressure cooker. Contact Rosewill Tech
Support to repair or replace.
• To lock Lid in place, remove any food residue from the cooking pot’s Upper Ring to ensure
a proper seal. Take the Lid off the Lid Rest, hold the Handle and close it downwards at the
“Open” Lid position. Turn clockwise until you reach the “Close” Lid position; a clamping
