Operation and Maintenance Manual for Rosenberg
Compact Ventilation Appliance series SupraBox
Comfort
BA 112 BB 11/12/A/SupraBox 1
3
1.2 Safety Instructions
At the time of delivery the Rosenberg SupraBox Comfort series is constructed and
produced according to the latest technical standard. Substantial tests of material,
function and quality guarantee a high value and a long lifetime. When improperly
used by untrained staff or not according to the instructions these machines can be
dangerous.
Read these instructions carefully prior to unpacking, assembling or performing the
maintenance!
The system may only be used after installation
•
The following work must only be performed by trained specialists:
- Assembly
- Electrical connection
- Connection of power terminals
- Maintenance work
•
Please use the compact ventilation appliance only according to the regulations within the
prescribed power limit. The power limit is included in the technical data specification or can be
found on the name plate. One single instance of the prescribed power limit being exceeded
will inevitably cause damage to the built-in components which results in the safe use of the
appliance being compromised.
•
Only approved material handling equipment may be used. Please consult your local
institutions or relevant regulations for the appropriate range.
•
Prior to working on electric machines these have to be disconnected from all poles
(padlockable selector switches with appropriate capacity and function are included in the
delivery and pre-installed).
•
After completion of work on the RLT-appliance the responsible person must make sure that
nobody is working on the installation before it is re-started.
•
Authorized persons must be instructed in the working area according to the normal accident
prevention regulations of the relevant
Employer’s Liability Insurance Associations and be trained
in their working area.
See also:
BGV A1
„General Prescriptions“
VBG 5
„Power-driven working equipment“
VBG 9a
„Load bearing equipment for hoisting operations“
BGV D27
„Industrial trucks“
BGV A3
„Electrical systems and equipment“
