Installation Guide Toyota 4-Runner
Rosen Entertainment Systems
Copyright 2011 All Rights Reserved
Installation Guide
DP-TY10A4 Rev A
Page 5
Mount the GPS and Sat Radio antenna in
a location on the exterior of the Vehicle
Route the GPS harness away from other power harnesses in
the vehicle.
This will help to ensure optimum performance of the GPS
system.
“OPTIONAL”
Install the iPod interface connector in a
location accessible to the end-user
Locate the iPod interface module in an area which can be
serviced in the future.
The iPod cable is intended to be a serviceable item, which
plugs into the iPod/Sat radio Interface Module.
INSTALL THE ROSEN NAVIGATION SYSTEM
You will need to prepare the Rosen Navigation System for installation in the vehicle.
STEP
4
Remove the DVD Transport Screws
There are 2 x Phillips Transport Screws which protect the
DVD Mechanism during transportation.
Transport Screws must be removed prior to installation.
Connect the Power and GPS Harnesses
The GPS Harness must be tightened with a WRENCH to
ensure it is properly seated.
Be sure to use white cable clamp to secure GPS antenna
cable
Failure to follow this step may result in poor GPS signal
Connect Optional Harnesses such as
iPod, Satellite Radio, Camera, Reverse
Sensors
These harnesses must be fully engaged prior to the system
installation.
See the Harness Diagrams for more information
