Installation Guide Toyota 4-Runner
Rosen Entertainment Systems
Copyright 2011 All Rights Reserved
Installation Guide
DP-TY10A4 Rev A
Page 9
Select Phone as the Source
Confirm Phone Pairing is successful
Troubleshooting
1) Confirm the Phone has BT and is in discoverable mode
2) Confirm the Phone is compatible with the system
3) Reset the system
Select NAV as the Source
Confirm the Navigation loads and signal strength is OK
Troubleshooting
1) Confirm the antenna has an unobstructed view of the sky
2) Confirm the antenna is located on the outside of the
vehicle
3) Confirm the antenna connection is properly tightened
Select Reverse Camera
Confirm the backup camera screen shows in reverse
Troubleshooting
1) Confirm the Camera is set to ON in the Installer Settings
2) Confirm the Reverse Trigger wire is attached properly
3) Confirm the Camera is receiving 12VDC as required
Service and Optional Parts List
Part Number
Description
Part Number
Description
DP-TY10A1
Quick Reference Guide
DP-TY10A2
Harness, Main Interconnect
DP-TY10A4
Installation Guide
DP-TY10A3
Harness, Steering Wheel Cntls
DP-1047
GPS Antenna Windshield Mount
DP-1001
Manual, Owner’s
DP-1008
Harness, AUX Out
DP-1002
Manual, Primo Navigation
DP-1009***
Harness,
AUX
IN DP-1010*
Harness,
Sensors/Camera
DP-1023 Pin,
Stylus
DP-1011 Harness,
Dolby
5.1/Amp
DP-1083-P11
Card,
MicroSD
w/
maps
DP-1022 Antenna,
GPS
DP-1013-1
Harness,
iPod
DP-1066**
Camera,
License
Plate
Black
DP-1007
Harness, USB Adaptor
DP-1067**
Camera, License Plate Chrome
DP-1051-1
Harness, Sirius Interface
DP-1068**
Camera, Universal Black
DP-TYJBL1
Harness, JBL Adaptor
* Included with DP-1066, DP-1067, and DP-1068
** DP-1010 Camera/Sensor harness included
*** OEM 3.5mm Aux input will NOT be retained when this harness is used
