Rosen Aviation 1043-229, Техническое руководство

Страница: 4 / 25

Rosen Aviation
10.4” Display on Manual Lift
Document Number: 101844 Revision: D
Date: 05/20/10
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 4 of 25
1. INTRODUCTION
This manual describes how to install the Rosen 10.4
” display on manual lift onto your aircraft. It
contains everything you need to know to wire the display and confirm that it is functioning
correctly.
Note: Only trained and qualified personnel should perform installation and service.
1.1. Product Information
The following documentation for the
10.4” display on manual lift specific to each display/video
combination is available on the Rosen web site at www.rosenaviation.com .

Outline and Installation Drawings
, 10.4” manual lift

1043-229 or 1043-329 display on manual lift

Technical Manual
– (P/N
101844 )

User’s Guide 10.4” Display on Manual Lift – (P/N
101845 )
From the Rosen Aviation home page, select the Products tab and browse by product category.
2. DISPLAY CONNECTIONS
There are several ways to connect the 10.4 display on manual lift
to an aircraft’s entertainment
system.
Use the pinout descriptions on page 2 of the Outline and Installation drawing to assist in the wiring
process. Pay close attention to the pinout information while completing wiring connections.
The 10.4 display on manual lift is available in two different configurations depending on the video
source that you install.

Composite
– model 1043-229

SDI (serial digital interface)
– model 1043-329
The on-screen menus are different for each configuration. Some options will be shown even
though they are not supported.
Note: This display is for entertainment purposes only; connect to a non-critical power bus.