background image

June 2017

8

Quick Start Guide

8.0 Product Certifications

Rev: 1.0

8.1 European Directive Information

A copy of the EC Declaration of Conformity can be found at the end of the Quick 

Start Guide. The most recent revision of the EC Declaration of Conformity can be 
found at 

EmersonProcess.com\Rosemount

8.2 Telecommunication compliance

All wireless devices require certification to ensure that they adhere to regulations 

regarding the use of the RF spectrum. Nearly every country requires this type of 
product certification. Emerson

 Process Management is working with 

governmental agencies around the world to supply fully compliant products and 
remove the risk of violating country directives or laws governing wireless device 
usage.

8.3 FCC and IC

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following conditions: This devices may not cause harmful interference, this 
devices must accept any interference received, including interference that may 
cause undesired operation. This device must be installed to ensure a minimum 
antenna separation distance of 20 cm from all persons.

This device complies with Industry Canada license-exempt RSS-247. Operation is 

subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device.

Changes or modification to the equipment not expressly approved by Emerson 

Process Management could void the user's authority to operate the equipment.

Cet appareil est conforme à la Partie 15 de la réglementation FCC. Son 

fonctionnement est soumis aux conditions suivantes: Cet appareil ne doit pas 
causer d'interférences nuisibles. Cet appareil doit accepter toute interférence 
reçue, incluant toute interférence pouvant causer un fonctionnement 
indésirable. Cet appareil doit être installé pour assurer une distance minimum de 
l'antenne de séparation de 20 cm de toute personne.

Cet appareil est conforme à la norme RSS-247 Industrie Canada exempt de 

licence. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet 
appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter 
toute interférence, y compris les interférences pouvant causer un mauvais 
fonctionnement du dispositif.

Les changements ou les modifications apportés à l'équipement qui n'est pas 

expressément approuvé par Emerson Process Management pourraient annuler 
l'autorité de l'utilisateur à utiliser cet équipement.

00825-0100-4045_RevAE.fm  Page 8  Monday, June 26, 2017  8:38 AM

Содержание Wireless Pressure Gauge

















Отзывы: