Rosemount Wireless Pressure Gauge, Быстрый старт

Страница: 2 / 16

June 2017
2
Quick Start Guide
Required equipment
NOTICE
This guide provides basic guidelines for Rosemount Wireless Pressure Gauges. It does not provide
instructions for configuration, diagnostics, maintenance, service, troubleshooting or intrinsically safe (I.S.)
installations. Refer to the Rosemount Wireless Pressure Gauge
Reference Manual for more instruction. The
manual and this guide are also available electronically on EmersonProcess.com\Rosemount .
Shipping considerations
The unit is shipped with the battery installed.
Each device contains one “D” size primary lithium-thionyl chloride battery. Primary lithium batteries are
regulated in transportation by the U.S. Department of Transportation, and are also covered by IATA
(International Air Transport Association), ICAO (International Civil Aviation Organization), and ARD (European
Ground Transportation of Dangerous Goods). It is the responsibility of the shipper to ensure compliance with
these or any other local requirements. Consult current regulations and requirements before shipping.
Explosions could result in death or serious injury.

Installation of device in an explosive environment must be in accordance with appropriate local, national
and international standards, codes, and practices.

Ensure device is installed in accordance with intrinsically safe or non-incendive field practices.
Electrical shock can result in death or serious injury.

Care must be taken during transportation of device to prevent electrostatic charge build-up.

Device must be installed to ensure a minimum antenna separation distance of 8 in. (20 cm) from all
persons.
Process leaks could result in death or serious injury.

Handle the transmitter carefully.
Failure to follow safe installation guidelines could result in death or serious injury.

Only qualified personnel should install the equipment.
Anti-seize paste or PTFE tape
(for NPT threaded connection)
Standard tools, e.g. screwdriver,
wrench, pliers
AMS Wireless Configurator version
12.0 or later, or Field Communicator
Contents
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optional: power/device check . . . . . . . . . . . . . . 3
Seal and protect threads . . . . . . . . . . . . . . . . . . 4
Mount device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turn on device . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connect to device . . . . . . . . . . . . . . . . . . . . . . . . 5
Eliminate mounting effects . . . . . . . . . . . . . . . . 6
Activate wireless . . . . . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 7
Product Certifications . . . . . . . . . . . . . . . . . . . . . 8
AMS
00825-0100-4045_RevAE.fm Page 2 Monday, June 26, 2017 8:38 AM