manualshive.com logo in svg

Rosemount 2700, Инструкция по эксплуатации, Страница: 2 / 94

Поделиться
Скачать
Rosemount 2700 Скачать руководство пользователя страница 2

ESSENTIAL  INSTRUCTIONS

READ THIS PAGE BEFORE PROCEEDING!

Your purchase from Rosemount Analytical, Inc. has
resulted in one of the finest instruments available for your
particular application. These instruments have been
designed, and tested to meet many national and interna-
tional standards. Experience indicates that its perfor-
mance is directly related to the quality of the installation
and knowledge of the user in operating and maintaining
the instrument. To ensure their continued operation to the
design specifications, personnel should read this manual
thoroughly before proceeding with installation, commis-
sioning, operation, and maintenance of this instrument. If
this equipment is used in a manner not specified by the
manufacturer, the protection provided by it against haz-
ards may be impaired.

• Failure to follow the proper instructions may cause any

one of the following situations to occur: Loss of life;
personal injury; property damage; damage to this
instrument; and warranty  invalidation.

• Ensure that you have received the correct model and

options from your purchase order. Verify that this man-
ual covers your model and options.  If not, call 1-800-
854-8257 or 714-863-1181 to request correct manual.

• For clarification of instructions, contact your

Rosemount representative.

• Follow all warnings, cautions, and instructions marked

on and supplied with the product.

• Use only qualified personnel to install, operate,

update, program and maintain the product. 

• Educate your personnel in the proper installation,

operation, and maintenance of the product.

• Install equipment as specified in the Installation

section of this manual. Follow appropriate local and
national codes. Only connect the product to electrical
and pressure sources specified in this manual.

• Use only factory documented components for repair.

Tampering or unauthorized substitution of parts and
procedures can affect the performance and cause
unsafe operation of your process.

• All equipment doors must be closed and protective

covers must be in place unless qualified personnel are
performing maintenance.

• If this equipment is used in a manner not specified by

the manufacturer, the protection provided by it against
hazards may be impaired.

WARNINGS

ELECTRICAL SHOCK HAZARD!!  

• Installation of cable connections and servicing of this

product require access to shock hazard voltage levels.  

• Main power and relay contacts wired to separate power

source must be disconnected before servicing.

• Do not operate or energize instrument with case open!

• Signal wiring connected in this box must be rated at

least 240 V.  

• Non-metallic cable strain reliefs do not provide grounding

between conduit connections! Use grounding type bush-
ings and jumper wires. Unused conduit openings need
to be sealed with NEMA 4X or IP65 conduit plugs to
maintain the ingress protection rating (NEMA 4X).

• Electrical installation must be in accordance with the

National Electrical Code (ANSI/NFPA-70) and/or any
other applicable national or local codes.

• Operate only with front and rear panels fastened and in

place over terminal area. 

• Safety and performance require that this instrument be

connected and properly grounded through a three-wire
power source.

•

Proper relay use and configuration is the responsibility
of the user.

CAUTION

This product generates, uses, and can radiate radio fre-
quency energy and thus can cause radio communica-
tion interference.  Improper installation, or operation,
may increase such interference.  As temporarily permit-
ted by regulation, this unit has not been tested for com-
pliance within the limits of Class A computing devices,
pursuant to Subpart J of Part 15, of FCC Rules, which
are designed to provide reasonable protection against
such interference.  Operation of this equipment in a resi-
dential area may cause interference, in which case the
user at his own expense, will be required to take what-
ever measures may be required to correct the interfer-
ence.

WARNING

This product is not intended for use in the light
industrial, residential or commercial environments
per the instrument’s certification to EN50081-2.

Rosemount Analytical Inc.

2400 Barranca Parkway
Irvine, CA 92606 USA
Tel: (949) 863-1181
http://www.Rauniloc.com

© Rosemount Analytical Inc. 1998

Содержание 2700































































































Отзывы:

Нет отзывов