8
UltraVista LC Installation and Operations Manual
Bezel compensation value calculation
When all the displays have been mounted, measure the bezel width and
height, and the viewable width and height as shown in figure 4. These
values will be entered into the OSD to set the gap compensation which will
produce a smooth transition from one display to the next.
Figure 4. Bezel calculation
Calculate the values of “X” and “Y” to enter into the OSD as shown below.
(See the OSD section for instructions)
Bezel Width (mm) Viewable Width (mm)
“X” value = --------------------------- X ----------------------------
Viewable Width (mm) 4
Bezel Height (mm) Viewable Height (mm)
“Y” value = ----------------------------- X ------------------------------
Viewable Height (mm) 4
Bezel Viewable
Width Width
(mm) (mm)
Viewable
Height
Bezel
Height