Rose electronics QuadraVista, Инструкция по установке и эксплуатации

Страница: 39 / 62

34 QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL
Computer / Reset PS/2
Select Reset PS/2 when the keyboard or
mouse have been disconnected or get out
of sync.
Use the arrow keys or the “+” and “-“ keys
to select the channel to reset and press
enter / select.
Figure 32. Computer / Reset PS/2
Computer / Change EDID/DDC
Select Change EDID / DDC to add two
selectable video modes to the list of video
modes available at each of the four video
ports.
Use the left, right arrow keys (
) to
select the first video mode to add. Once
selected, use the up, down arrow keys
(
) to select the second video mode to
add. Use the left, right arrow keys ( )
to select the second video mode to add.
When both video modes have been
selected, use the up, down arrow keys
(
) to select signal and the left, right
arrow keys ( ) to select analog or
digital.
With all entries completed, select “WRITE”
and press ENTER / SELECT and the
window shown on the right in Figure 34
will open.
(Procedure continued on next page)
Figure 33. Computer / Change EDID/DDC