Parts
Instruction Sheet
Note:
• Use on dust-free surface only.
• Use in dry conditions only.
• Clean using any non-scratching detergent.
Step 1
Place poster into rubber rim, keeping rough side
of window on top.
Fig. 1
Step 2
Start by bending all corners of the window into
the rubber rim. Keep Floor Windo
®
flat.
Fig. 2
Step 3
Keep both thumbs on window. Bend rubber rim
down to flex rim over window.
Fig. 3
Step 4
Make sure all sides are closed securely.
Fig. 4
Step 5
If using on carpet, add Velcro Strips provided
to opposite ends of short sides to hold Floor
Windo
®
more securely.
Fig. 5
Assembly Instructions
Incept-10.25.00
Rubber Rim
Clear window
“Your Poster”
Floor Windo
®
"Your Poster"
Clear Window
Rubber Rim
Figure 3
Flex to pop
Rim over
Window
Your
Graphic
Here!
Figure 4
Clear Window
Rubber Rim
"Your Poster"
Figure 1
Figure 2
Corners
in first
Floor Windo is a registered trademark of Floor Windo International.
Adhesive
Velcro Strips
Figure 5
