The AnoScreen™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INAnoScreenAnoFoot
Incept-8.15.02
Instruction Sheet (side 2)
Instructions for Assembly continued
7
AnoScreen™
AnoFoot
Corner brackets
& Split Rails
AnoScreen Corner Bracket
Step 4
Assemble the vertical rail assemblies onto
the upward facing corner brackets already
inserted into the bottom rails. All 4
brackets can go into the vertical rails
at one time, or do one side at a time.
Note
: Use the two vertical rails without
flex spine connectors on the outside
edges of the outermost panels.
Step 5
Insert corner brackets into ends
of split rails. 1 per end. Use thumb,
as shown in illustration.
Step 6
Assemble split rails onto top ends
of vertical rails, one inside and one
outside of each panel of the
AnoScreen.
Step 7
Insert and change signs through top
of each panel.
Step 8
Snap AnoScreen corner brackets onto
split rail at a 90˚ angle.
4
5
7
6
