The AnoScreen™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INAnoScreenAnoFoot
Incept-8.15.02
Instruction Sheet
AnoScreen™
Instructions for Assembly
Parts
(continued on other side)
AnoScreen
Corner Bracket
06-3000
1
1a
2
3
4
Step 1
Insert corner brackets into ends of
bottom rails, using thumb, as shown
in illustration. 2 brackets per end of
each rail.
DETAIL 1a
- Corner bracket tension
tab faces toward outside of frame.
Step 2
Snap one AnoFoot onto both the
left and right sides of each bottom
Ano rail section.
Step 3
Lay out parts as they will be configured
on the floor. (2, 3 or 4 panels)
AnoFoot™
12-0200
Corner Brackets
Vertical Rails
with Flex Spine
2 Panel
3 Panel
4 Panel
Single rails
Split rails