Rose Band ShowLED Classic, Руководство пользователя

Страница: 9 / 24

9
CONNECTINg THE SHOWlED CONTROllER
1. Connect your application
1
to the LED output connectors of the controller.
2. Connect the powercord to the MAINS (90-260V) input of the controller.
3. At this point you will need to set the parameters of the controller.
You will learn how to do so from this manual.
4. If you have more than one controller to connect.
See setting up the control network, further in this manual.
SETTINg Up THE CONTROl NETWORk
The control network is set up with the use of 5 pole XLR cables. In the following
drawings only the control network is drawn. Depending on your application, you will
choose a configuration.
Stand Alone Mode (No lightboard present)
The first controller
is set to operating
mode 0
All other controllers are set to operating mode 1
All parameters can be altered on the first controller.
1
For instance, a starcloth, a logo, …
Controller
1
DMX DMX
in out
Controller
2
DMX DMX
in out
Last
Controller
DMX DMX
in out