Rose Band ShowLED Classic, Руководство пользователя

Страница: 6 / 24

6
How to replace the fuses
Disconnect the powercord. Unscrew the 4 bolts on the two sides of the device and the
4 top screws of the XLR connectors of the LED outputs (You need a PH1 screwdriver).
Remove the top of the device (it is not necessary to disconnect the flat cable you
encounter). Locate the fuse holders marked on the PCB as F1 and F2. You can open the
fuse holders by turning the caps counter clockwise.
Determine which fuse is blown. (If you are not sure, replace both) Replace the fuse(s)
with the right kind (fuse 2.0A slow-blow 5x20 mm). Replace the caps together with
the fuses and lock them by turning clockwise.
Put the top of the device back into position and fasten the 4 little bolts on the two
sides of the device and the 4 top screws of the XLR connectors of the LED outputs.
Reconnect the powercord and check if the device is working properly.