Rosco silk, Руководство пользователя

Страница: 57 / 63

57
sYMPToM
Unit does not respond
to DMX control, but
DMX indicator LED ‘lit’
Unit does not respond
to DMX, but DMX indicator
LED ‘off’
Two fixtures on the same
DMX channel output
different CCT when
operated from a desk
Lights start flashing when
DMX cable is plugged in
Two lamps on the same DMX
channel appear to have
different output
DMX light flashing consistently
Two lamps appear to have
different output >4000K
PossIble CaUse
Unit set to incorrect
DMX address
No DMX signal is being
received
Bad Cable
No DMX plugged in
Power off at the console
They are set to different
color profiles
Light is in DMX wireless
mode and receiving two
DMX signals
They are set to different
dimming curves
Fixture is in master or
control mode
It is likely fixtures are set to
different output profiles
solUTIon
Check DMX address
Check cable and DMX
run from the console
Set all fixtures to the
same color profile
Unplug cable or set lamp
to standard DMX mode
Set all lamps to the same
dimming curve
Set fixture to wireless or
standard DMX mode
Set both to 5.2 Standard or
Flat mode
TRoUblesHooTInG