Rosco silk, Руководство пользователя

Страница: 10 / 63

10
oPeRaTIon
PoWeRInG on
1. Silk LED fixtures are supplied with a standard
100-240 VAC switching power supply, which is
mounted in a cradle on the rear of the unit. A lead with
a 4 - pin XLR connector brings DC power from the
power supply to the Silk.
a. Silk LED fixtures can be powered by V-Mount
batteries. Remove the power
supply and cradle, and then replace it
with an optional Silk V-Mount Cheeseplate
Battery Holder.
b. Silk LED fixtures can be powered by Anton/Bauer
batteries. Remove the power supply and cradle,
and then replace it with an optional Silk Anton/
Bauer Cheeseplate Battery Holder.
2. Make sure the 4-pin XLR connector from the power
supply is plugged into the Silk, and then plug the
power supply into mains power: 100 – 240 VAC.
Then switch on the unit with the rocker switch on
the User Interface.
a. The rear display will illuminate.
b. Settings will default to those in use when
the unit was last powered down.
3. If desired connect the Silk LED fixture to a DMX
console using the 5-pin XLR ports on the rear
control panel.
a. The presence of a DMX input signal is
automatically detected.
b. The Blue Indicator LED will illuminate.
DIsPlaY
Top Left Dimming percentage
Top Right DMX address
Bottom Left Color temperature
Bottom Right Input DC voltage
noTe:
If the input voltage drops
below 13.5V, the input voltage will
flash. (Only applies to 110, 210 and
205