Rosco MIRO Cube 4C, Руководство пользователя

Страница: 35 / 40

Warning Messages
35
The Miro Cube has warning messages built in that will instruct you
when an action needs to be taken. On startup, if a DMX signal is not
present on the DMX connectors, and the fixture is set to DMX mode, all
of the LEDS will glow dimly. This feature can be used for
troubleshooting your DMX control lines. Once DMX is detected the
fixture will instantaneously respond to the command it is
given. The Miro Cube is equipped with an internal temperature
sensor. If an overheat condition is experienced all of the red LEDs will
glow dimly and a warning message will be displayed on the rear LCD.
If this occurs unplug the power connector from the unit and
wait three seconds. Plug the fixture in again. If the same condition
occurs again contact the manufacturer.