Rosco MIRO Cube 4C, Руководство пользователя

Страница: 25 / 40

Color Wash Mode
25
The wash timer determines how long it takes for the Miro Cube to
complete an entire color cycle, and, by extension, the rate at which the
colors change. Choose a short time for a rapid wash or a longer time for
a slower wash. To change the Wash Timer, press MENU and select
“CHANGE WASH TIMER?”
by pressing
OK
. Use the or keys to
select a Wash Time between 15 seconds and 60 minutes (in 15 second
intervals).
When set to Color Wash Mode, the Miro Cube is operating as a DMX
master and is sending DMX512 data, allowing it to control unique color
washes on up to fourteen additional fixtures in a chain (set to DMX
mode).
Wash Timer
Wash Offset:
NOTE: Slave fixtures should be set to DMX Mode and assigned to
channels five, nine, thirteen, etc (in four channel increments).