20
System Setup and Configuration
Configure your Dual-Vision
TM
XC Recorder prior to installation. (Player v1.1.0.1 or later)
Run “player.exe” program located on your SD card, User Manual CD or Desktop (if copied to your PC)
Click on the System Setup configuration icon (
) located at the lower right corner of the player. The
following window will then appear.
CONFIGURATION ITEM
DESCRIPTION
Video Quality
Recommendation: 1-Normal is satisfactory for most applications
Video Rate – Frames /
Second
Recommendation: 5 Frames / Second / Camera. If you are using only 2 internal
cameras (C1 & C2), set AUX camera OFF
Video Format
For AUX camera (external): Select NTSC for US customer
Audio Recording
Turn audio ON or OFF
Password Setting
Video data files may be password protected at the manager’s option
Time Zone Setting
Sets the correct time zone and Daylight Savings Time where applicable
Unit of Speed
MPH, KPH, or KNOTS
Vehicle Number
Manager generated ID – this will appear on the SD card recordings
Speed Limit
Do not leave blank. Enter a high value if notification is not desired
Speed Tag / Event
Options to choose unprotected “Tag Only” or protected Tag + Event
Event Replace Selection
Replace oldest Event with newest Event when SD Card Events “FULL”
Brightness of LCD
Brightness setting from 0 – 5
Disable Erase Button
Prevents drivers from activating the Event Release Button (see Page 10)
Speaker Volume
Adjusts chime volume from 0 – 5
G-Sensor Sensitivity
Sets the X, Y and Z sensitivity in 0.1G increments up to 4.0G (see Page 27)
Remote Cam. Option
Select the external AUX camera type
Parking Setup
Configure parking surveillance mode
