11
Installing External IR Module and Driver
Event Button
1.
Clean the surface with commercial glass cleaner
before attaching the External IR Module. Please
make sure that the mounting direction of the IR
module is as indicated by the yellow label. For the
most effective lighting, make sure there are no
obstructions in front of the External IR module.
2.
Connect the External IR Module cable to the PDC Module as shown.
3.
Find the best location for the Driver Event Button.
Use caution in avoiding locations where the button
may be inadvertently pressed, such as by the
driver’s knee. Remove the adhesive film and
attach the button. Connect the Driver Event Button
plug to the PDC Module.
4.
Secure all loose wires and components with cable
ties and reinstall vehicle panels.
5.
Typical Dual-Vision™ XC completed installation.
External IR Module
