Galaxy HDX4 RAID Quick Install Guide
-
6 -
Contact Rorke Tech Support 800 328 8147
Step 3 Drive Installation
Carefully install the disk drives into the chassis. The drives can go into any empty
location and all locations must have a drive tray installed.
Note: If a “Cold Spare” was shipped, do not install this drive. Leave it in
it’s protective anti-static bag and put it in a secure place. Use it as a
defective drive replacement only.
1 Prepare drive tray for installation:
Use a small flatblade screwdriver to turn the drive
tray bezel lock to a horizontal position.
2 Unlock the drive tray:
Open the front bezel of the drive tray by pushing the release
button.
3 Slide drive trays into place:
Install the drives trays into the tray slots. Once installed
close the bezel until the release button secures the bezel in place. Rotate the bezel lock
to the vertical position to secure the drive tray into the slot.
