Galaxy HDX4 RAID Quick Install Guide
-
11 -
Contact Rorke Tech Support 800 328 8147
4 Host Cabling:
Install the provided SAS cables into each of the controllers SAS ports.
Although we can’t predict the exact way you will want to cable the Galaxy RAID into a
SAS environment, we have come up with a worse case diagram to show you how that
would be done in a dual server configuration, below.
Step 4 Cable Installation for 10GbE iSCSI SANs
Follow these steps to connect your management ethernet port, expansion
connections to add on RAID JBODs, power, and hosts to the Galaxy RAID.
1 Management Interfacing:
Use your CAT5E 100/1000 LAN cable to connect to the
management ethernet port on the rear of the Galaxy [ to the right of the DB9 connection] .
This port is used to manage and change the RAID configurations.
