Ropox 4Single Series, Руководство пользователя и инструкции по установке

Страница: 13 / 15

Page 13
Faults Possible solutions
The height of the frame
cannot be adjusted (feels
difficult to adjust)
•
Check that the battery is charged. If the battery
level is so low that it is recommended that you
recharge it, a warning sound will beep for 3
seconds.
•
Check leads and plug connections between the
control box and motors.
•
Check leads and plug connections between the
control box and control button.
•
Check that the anti-crushing strip is connected. (If
no anti-crushing strip is connected, a shorting plug
must be connected to the safety shutout lead.
•
If anti-crushing strips are connected, check that
they are not enabled.
The frame does not
move smoothly
•
If the frame does not move smoothly, you must
reset it. See section 7
, “Maintenance”.
The table does not move
when I press the control.
•
Please note that you must press the same button
twice to make the table move. The first time is to
enable the battery; the second time you hold down
the button for the actual operation.
7.2 Waste disposal
Used equipment must be disposed of in accordance with national legislation. We
recommend that the product be dismantled as far as possible so that as much as
possible can be reused. Examples of groups into which this product can be sorted:
metals, plastic, electrical components, batteries and parts for destruction.