Ropox 4Single Series, Руководство пользователя и инструкции по установке

Страница: 11 / 15

Page 11
7 Maintenance
For safety and operational reasons, we recommend an annual inspection of the
frame:
•
Check that all bolt connections are securely tightened.
•
Check that the table can move freely and without restriction from the lowest
position to the highest position without any problems.
•
Resetting the frame: Press the DOWN button and lower the frame to the
lowest position. Press the DOWN button once more and hold it down for an
additional 5 seconds to reset the control box. Check that the movement takes
place in an even, controlled way.
•
Check that all leads are correctly fitted and are undamaged.
Fill in the service form after each inspection. See section 7.1.
Only Ropox’s original spare parts may be used when replacing parts. If other spare
parts are used, any right to make a claim under warranty may be lost.
CAUTION
Under no circumstances must the battery be connected to mains
power (i.e. for recharging) while the table is being cleaned and
electrical components must not be washed with water.