Ropox 40-44010, Руководство пользователя

Страница: 11 / 41

11
TF 200.01.0047_eng
Basic
(40-44012 and 40-44013)
Construction
The wall must be made of a material suited
for screw mounting and approved for damp
rooms.
The hatched area is the minimum area for
reinforcement of the wall.
Reinforcement from floor to ceiling is
advisable.
Load-tested in Accordance to DS/ISO 17966,
the maximum user weight has been fixed at
400kg (881 lbs).
Max. tensile load of upper screws
85kg/screw (187 lbs)
The washbasin is supplied with a set of 6
screws and rawlplugs suitable for mounting
on a concrete wall. The fitter should always
consider the material, condition and strength
of the wall and use screws and rawlplugs
suitable for the specific wall type.
Plumbing
The drain is Ø32
(1 ¼”) and ends in an
Ø32x88.5° drain elbow.
The maximum protrusion of drain connection
and elbow from the wall is 90mm
(3 ½”) to
allow for the covers.
The water supply ends in 2 (two) 90° shut-off
valves with ½” outside thread pointing
downward (not included).
The maximum protrusion of the shut-off valves
from the wall is 90mm
(3 ½”) to allow for the
covers.
It is important that all hoses for water
connection and drain are flexible to allow the
frame to move freely within the height
adjustment range of 710-1010mm
(28” – 39
8/10”) (including washbasin).
If a location of water supply and drain different
from the recommended positioning is required
or if there is a floor drain, the Support Washbasin
will have no covers.
For purchase of adapters for connection to
various standard installations, see ”Connection
Adapters
– Other Washbasins”.
Note
The illustrations show the left-hand model 40-
44012