R O P E X
R O P E X
R O P E X
R O P E X
INDUSTRIE - ELEKTRONIK GmbH
Page 2
1. APPLICATION AND SHORT DESCRIPTION
As all other
, this unit is used to control
the temperature of heating elements (heatseal bands,
beaded bands, cutting wires, etc.) by measuring the
resistivity of the heating element.
Precision measurement together with high response
produces perfect temperature control during the
heatsealing process.
With a correctly installed system, the temperature can be
controlled with an accuracy of +/- 3%.
This controller can be used in a large variety of applica-
tions since it can be set for a few milli-ohms or several
ohms by means of dip switches, as well as high output
voltage for a short time up to 10KVA (at 400V).
RES controllers
This unit is excellent for
horizontal and vertical packaging machines
form/fill/seal machines
bag filling and closing machines
wrapping machines
bag making machines, etc.
The electronic components are mounted in a compact
housing to be installed into the control panel (72x144mm).
The front of the controller displays all of the operating and
output functions. Wiring is kept to a bare minimum.
The front panel is protected by means of a clear plastic
latchable cover.
Comprehensive self-monitoring of the internal and
external circuits provides additional operating reliability
(see "ALARM").
3
15
1
13
5
4
6
7
2
Start by Contact
or
24VDC signal
Plug in terminals
Dip Switches to
select U range
2
Potentiometer to select
Seal Temperature
(10 turn Pot)
Temperature Indicator
°C
"Z" point = 20°C
Jumper to
select Frequency
50 or 60Hz
LED red
blinks in measuring mode,
glows continuously when
controller is operating in
the regulating mode.
"Hand" Push Button
Starts the Controller
Reset Button after
an Alarm shutdown
LED red
when there is a
malfunction
10-turn Potentiometer
for "Z" calibration
(needle at "Z")
