Roper Whitney 3617, Инструкция по эксплуатации и идентификация запчастей

Страница: 6 / 22

Roper Whitney - Model 3617 Crimping & Beading Machine Manual
LUBRICATION
The specially compounded lubricants or their equivalent as specified on the data plate furnished
with your machine and the lubrication chart must be used. See Page 7 for lubrication points.
LUBRICATION CHART
LUBRICANT
COMPONENT MOBILE TEXACO INTERVAL
BEARING BLOCKS *MOBILE 40 HOURS
GREASE *TEXCLAD
SPECIAL 2
PULLEY IDLER SHAFT 40 HOURS
* FOR REFERENCE - ANY EQUIVALENT IS ACCEPTABLE
-6-
Lubrication and visual inspection at regular intervals are required for good maintenance. Use
machine for its intended purpose only and always within rated capacity. Do not operate with
guards removed nor when inspection indicates possibility of malfunction. Correct operation is a
necessary safety precaution and is required to avoid operator injury. Gears, belt drive and motor
are fully guarded for operator safety. Never leave machine running unattended. Keep work area
clear and in proper order. Parts list, drawings, and wiring diagrams are included with these
instructions. For repair parts, when needed, give complete Model No. and Serial No. as listed on
the machine nameplate. Identify parts wanted by description and reference to parts list and
drawings.
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY PHONE: (718) 605-0395 - www.hweiss.com