Roper Whitney 3617, Инструкция по эксплуатации и идентификация запчастей

Страница: 16 / 22

Roper Whitney - Model 3617 Crimping & Beading Machine Manual
The forward and reversing relays are located in the reversing magnetic starter box, and will not
require service nor attention by the machine operator.
The brake is part of the electric motor, and will quickly stop the forming rolls when the motor power
is switched off. The motor power can be switched off by either the footswitch or the panel push
button switch. Upon switching the motor power to “on” the brake will automatically release and
allow forming roll rotation.
The footswitch has two anti-trip features: 1) the foot pedal is covered to prevent someone from
stepping on the switch. 2) The operator’s foot must extend entirely to engage a “toe” clamp to
release the foot pedal, allowing actuation of the electric switch. Downward foot movement, there-
fore, switches electrical power to the motor; and upward foot movement switches the motor
power off. The “toe” clamp will reset to prevent anti-trip when the operator’s foot is removed from
the switch.
The gearmotor is mounted on a pivoting bracket. The belt adjustment is properly set and should
not be changed. Do not remove belt guard cover; must be in position when operating roll forming
machine.
-16-
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY PHONE: (718) 605-0395 - www.hweiss.com