adjustments & maintenance
The water level in the cistern can be adjusted by turning the adjustment controls with a screwdriver - clockwise
will increase the water level, anti-clockwise will lower the water level.
The fill valve can be removed and cleaned if the water filling slows down or doesn’t
stop. The images above show how the valve can be disassembled and cleaned.
The flush valve can be adjusted to increase or decrease the amount of water
used during each flush. It is factory set for 6L full flush & 3L reduced flush.
6L
-
+
Twist anti clockwise
and remove through the
protective case
To allow space for the installation of the waste pipe allow at least 170mm of space between the wall and the wall
hung frame.
The waste pipe can be installed easily by opening up the fixing collar and positioning the lip of the waste pipe inside
the collar. The collar should then be clipped closed to secure the waste pipe in place before it is connected to the
toilet pan.
(Wall Hung Frame dimensions - Top mounted flush plate shown)
installation of waste pipe
210
200
170mm
170mm
812
500
35
180
230
100
Ø110/Ø90
170-215
95/115
20~100
74
2
170 min
7
Flush plate cut out
TR9005
