Ropam elektronik BasicGSM 2, Руководство по установке

Страница: 24 / 83

Page 20
System configuration
© 2017 Ropam Elektronik
- to end the remote connection to the module, press the icon:
Functional description.
The description of the function and configuration is presented with the windows, descriptions and
messages from BasicGSM Manager.
Tab: SIM card settings.
SIM CARD PIN
In the field "SIM PIN" enter the digits of the SIM card PIN installed in the module phone. If you are
using a non-PIN (disabled) card, do not enter PIN code.
COMMENTS:
- in the factory settings of the module is not transmitted PIN. This allows you to install the SIM card
and start the module without worrying about locking the SIM card by entering the wrong PIN code by
the module.
- no PIN code is required to disable the PIN code request only for non-PIN cards
TELEPHONE NUMBER OF THE OBJECT
This is the SIM card number in the module. The field is saved to the module memory.
Do not monitor the jamming GSM Jamming: This option disables GSM modem jamming detection.
Do not signal low GSM network failure: Low GSM signaling off
Restart modem every 24h: Modem restart function every 24 hours since the last restart of BasicGSM
module 2. This function is useful in cases where there are problems with network login, unstable
connection with BTS operator, virtual operators. The module resets only the GSM modem, the