ROOTS Rhino RD180, Руководство оператора, Страница: 66 / 88

66
Rhino RD180
MAINTENANCE
To replace the side broom: Dirt Hopper Aprons
1. Park the machine on a flat surface.
2. Engage parking brake.
3. Stop the engine and remove key.
4. Rotate the side broom by hand till the lift bar is visible. Wear safety gloves.
5. Lift the bar to disengage the side broom from its drive plate.
6. Slide a new broom onto the drive plate by aligning the three drive pins to
the slot on the drive plate.
7. Push the broom till it snaps on to the retaining bar.
NOTE: Use only brooms recommended by the manufacturer.
The dirt hopper aprons are located at the bottom rear of the hopper.
The aprons float over the debris to direct it into the hopper.
These aprons are prone to wear due to friction.
Inspect these aprons everyday. Replace if it is damaged to it no longer
contacts the floor.
The dumping door aprons are segmented ones. Inspect them for wear or
damage and replace if necessary.
Main broom chamber aprons
The broom chamber aprons are located on the bottom side of each door and
at the rear of the main broom around the chassis.
Each of these aprons will be in contact with the floor at all times.
Check the aprons for wear or damage and adjust them if necessary.
Main broom apron