ROOTS Rhino RD180, Руководство оператора, Страница: 50 / 88

50
Rhino RD180
MACHINE OPERATION
8. When the foot is taken off the pedal the machine will slow down and will
coast to a stop.
To stop or slow the machine quickly press the brake pedal downwards and
release when stopped.
Slowing & Stopping:
WARNING: Do not press the brake pedal simultaneously while the
directional control pedal is operated. It will cause damage to the
hydrostatic drive system.
Driving on Inclined Surfaces:
CAUTION: Exercise caution for oncoming vehicles and other
equipments and stationary objects, people or animals.
F Drive slowly on downhill/uphill, on turns, wet grounds, ramps.
F Do not make sharp turns: machine might tip over.
F Do not adjust the driver seat while driving the machine.
F Do not drive with the hopper in raised position.
F Do not park the machine in slopes.
F Do not jack the machine in slopes.
F Do not go on a steep downhill with a filled hopper.
F Raise the hopper slightly before entering/exiting a ramp to prevent any
damage to the hopper door.
9. Use the headlamps to provide illumina on in dark or low lit
areas. Use the direc onal indicators while turning the
machine in transport mode.
Ø
Op onal work lamps provide extra illumina on on the corners/rear of
the machine, they work in conjunc on with the headlamps.
Driving with Headlamps & Op onal Work Lamps:
NOTE: Switch Off the headlamps and work lamps when not in use. There is a
risk of battery drain.
10. Always use the rota ng warning beacon lamps (if equipped) when
driving/opera ng the machine to warn others in the vicinity of
the machine.
1. Beacon lamp placement without OHG.
2. Beacon lamp placement with OHG.
3. Push the switch upwards to switch ON the beacon lamp.
1
2
3