Ronix RMD-AH04, Руководство по эксплуатации

Страница: 3 / 56

1. Safety Precaution
03
Real Time Recording & Full HD Display
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the device to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source.
The symbol is intended to alert the user to the presence of important operating and
maintenance(servicing) instructions in the literature accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
Warning :
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user of the model requires
continued operation during power mains interruptions, it is recommended that the model be powered
from an uninterruptible power supply (UPS) or a battery.
Notice :
• The image used in this instruction manual are processed to help comprehension and may differ from
actual video of the camera.
• Avoid installing areas where has shock or vibration which results in the problems.
• Pay attention to safety when laying the connection cable and observe that the cable is not subjected
to heavy loads, kinks or damage and no moisture can get in.
• Never open the device such as boards or lens.
• The warranty becomes void if repairs are undertaken by unauthorized persons.
• Maintenance and repair have to be carried out only by authorized service centers.
• Use only a mild detergent to clean the housing.
• The DVR should never be operated beyond the technical specifications.
• This can lead to destruction.
• The DVR should never be operated in water.