Ronix RC-5010, Руководство пользователя

Страница: 6 / 21

AIR COMPRESSOR
6
- Prevent unintentional starting. Ensure the switch is in the off-po-
sition before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your fin -
ger on the switch or energizing power tools that have the switch on
invites accidents.
- Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
- Don’t overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected sit-
uations.
- Dress properly. Don’t wear loose clothing or jewelry. Keep your
hair, clothing, and gloves away from moving parts. Loose cloths,
jewelry or long hair can be caught in moving parts.
- If devices are provided for connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
- Don’t force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and
safer at the rate for which it was designed.
- Don’t use the power tool if the switch doesn’t turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
- Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, chang-
ing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and don’t
allow persons unfamiliar with power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands
of untrained users.
- Maintain power tools. Check for misalignment or binding of
moving parts, breakage o parts and any other condition that
4