background image

USER MANUAL

7

REVERSING SWITCH ACTION

This tool has a reversing switch to change the direction of rotation. 
Depress the reversing switch lever from the Right side for clockwise 
rotation or from the Left side for counterclockwise rotation. When the 
reversing switch lever is in the neutral position, the switch trigger cannot 
be pulled.

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is 
removed before adjusting or checking function on the tool.

INSTALLING OR REMOVING BATTERY CARTRIDGE

-To remove the battery cartridge, withdraw it from the tool while sliding 
the red button on the front of the cartridge.
-To insert the battery cartridge, align the tongue on the battery cartridge 
with the groove in the housing and slip it into place. Always insert it all 
the way until it locks in place with a little click.  
-Do not use force when inserting the battery cartridge. If the cartridge 
does not slide in easily, it is not being inserted correctly.

Battery cartridge

Button

SWITCH ACTION

CAUTION:

-Before inserting the battery cartridge into the tool, always check to 

Содержание 8905K
















Отзывы: